LCD Screen and Digitizer Full Assembly for P30 Lite (Black) Before Installation Notes: 1. Test before installation. When testing, do not remove any protective film or tags. Pay attention to static electricity. Before attempting any repair, ground yourself using an ESD (electrostatic discharge) strap to prevent static damage to internal components. Wear eye protection and handle glass carefully to avoid injury. 2. Screen replacement is fragile. Test the unit before full installation. Perform a simulation test by connecting the motherboard, LCD, and o cable with the new replacement, then power on to verify functionality. If the test is successful, proceed with installation. If the screen does not display, contact support immediately. Do not force installation. No responsibility is assumed after the screen is installed. 3. Avoid over-bending the LCD cable. Bending beyond 90 degrees may cause display failure. Product Features: Replacement LCD display and touch screen digitizer assembly for P30 Lite. Replace a damaged or non-functional screen with a new unit. Restore your device’s appearance and performance. Precise fit and full functionality. Each unit is tested and in good condition before shipment. Professional installation is highly recommended. No responsibility is assumed after installation.