PCIe To 4 Ports SATA 3 III 3.0 6 Gbps SSD Adapter PCI-e PCI Express X1

¥7,490
配送料無料

PCIe To 4 Ports SATA 3 III 3.0 6 Gbps SSD Adapter PCI-e PCI Express X1

  • ブランド: Unbranded
希望小売価格: ¥10,690
価格: ¥7,490
得する金額: ¥3,200 (29%)
販売元:
¥7,490
配送料無料

在庫あり

以下の支払い方法を利用することができます

説明

Description: Product specifications: Comply with Serial ATA 3.0 specification, backwards compatibility SATA2.0 SATA1.0 Comply with PCI-Express v3.0 specification, backwards compatibility PCI-Express v2.0 1.0. Support communication speed of 6.0 Gbps, 3.0 Gbps and 1.5 Gbps Gen1i, gen1x, gen2i, gen2m, gen2x and gen3i are supported. Supports 4 SATA Support AHCI1.0 mode Native command queue (NCQ) is supported Support FIS switching based on port multiplier switch or command. Support hot plug and hot plug. SATA6G, 3G and 1.5G compatible hard disk drives Bus interface: PCI-Express x1 slot Expansion interface: 4 SATA3.0 interfaces System requirements: have an available PCI Express X1 slot and support PCI-EX2X8X16 at the same time Operating system: Windows10/8/linux PCIE to SATA3.0 adapter is used as follows: I. connection conditions and solutions of system disk and PCIE to SATA3.0 adapter card: 1. the SATA interface mode from PCIE to SATA3.0 is AHCI mode. if you want to insert the system disk on our card, the premise is that your system disk must be installed in AHCI mode when installing the system on the motherboard, otherwise, the system cannot be started through our card adapter card. 2. If it is determined that the SATA interface installation system with the system disk inserted into the motherboard is AHCI mode, you can directly insert the hard disk into our card, and then enter the BIOS of the motherboard to set the system disk as the first boot. 3. The above two conditions are met. If it still cannot be started or restarted repeatedly, it may be caused by the conflict between the hard disk interface of the motherboard and our adapter card. The solution is to enter the BIOS of the motherboard and set the hard disk interface option of the motherboard to Disabled. Save the restart before starting the system. II. Connection conditions and solutions of ordinary disk and PCIE to SATA3.0: 1. when the system disk is inserted on the motherboard and the ordinary disk is inserted on the PCIE-to-SATA3.0 card, it is only necessary to detect the adapter card information and the ordinary disk model when starting. 2. If 1 condition holds, the system still cannot be started, then to enter the BIOS of the motherboard, set the system disk as the first boot. III. Connection between system disk and ordinary disk and PCIE to SATA3.0 and its solution: 1. premise, if the system with the original motherboard installed on the system disk is AHCI model test, it can be realized by the following methods. if the system is installed in IDE mode, it can only be reinstalled through PCIE to SATA3.0. 2, 1 After the conditions are met, if you cannot start, you need to enter the BIOS of the motherboard and set the system disk as the first boot. 3. If all the conditions in 1.2 are met, it still cannot be started, so it may be the conflict of the integrated SATA interface. Please enter the motherboard BIOS and set SATA to Disabled Specifications: Product: adapter card Interface: PCI-E 1X (compatible with 1X,4X,8X,16X) PCB color: black gold plate Interface rate: 6Gbps 2U small chassis: supported with half-height baffle Master control chip: ASMedia ASM1064 System support: WIN8 WIN10 LINUX Package Included: SATA3.0 expansion card *1
  • Fruugo ID: 210894326-449520717

製品安全情報

以下に概説するこの製品に固有の製品安全性情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

製品安全ラベル

CE Mark

配送と返品

2日間以内に発送

  • STANDARD: 無料 - 間の配達 木 30 10月 2025–木 06 11月 2025 - 無料

中国より発送。

ご注文の商品は、お客様の仕様に従い、万全の状態で配送されるように最善を尽くしています。しかし、もし注文に抜けがあったり、注文したものと違う商品が届いたり、注文に満足できないその他の理由がある場合は、注文全体やその中のいずれかの商品を返品し、その全額の返金を受けることができます。 全額返金ポリシーを見る

製品コンプライアンスの詳細

以下に概説されているこの製品に固有のコンプライアンス情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

製造業者:
次の情報は、Fruugoで販売される関連製品の製造業者の連絡先詳細です。

  • shenzhentianyeruanjianyouxiangongsi
  • shenzhentianyeruanjianyouxiangongsi
  • 220, Building 1-2, Xuri Community, Fukang Community, Longhua Street
  • Longhua District
  • Shenzhen
  • Shenzhen
  • CN
  • 518000
  • caiksamg@163.com
  • 19924551597

EUにおける責任者:
次の情報は、EUにおける責任者の連絡先情報の概要です。ここで言う責任者とはEUに拠点を置く指定経済事業者で、EU域内で販売される関連製品に関するコンプライアンス義務を負う者のことです。

  • EC REP SERVICES SL
  • EC REP SERVICES SL
  • Calle Gran Via 49
  • Madrid
  • ES
  • 28013
  • ecrepservice@hotmail.com
  • 0034-682797075