8 SATA3.0 interfaces-This PCIE SATA card allows you to add 8 SATA 3.0 6Gbps devices to your computer. You could make the system to boot from this SATA card but non RAID, (The RAID in is only for native SATA and can be grouped. It is an expansion card cannot support chips). Product chip -Using the Marvell 88SE9215 + 575 chip enhances heat dissipation, long-lasting high temperature resistance and more stable operation. Support system -WINXP/ WIN7/ WIN8 /WIN10/ LINUX. Support interface: There is an available PCI X1 slot, while supporting PCI-E X2 /X4/ X8/ X16 (This SATA 3.0 expansion card is only suitable for motherboard slots via PCI-E . Do not apply to PCI slots). Material:PC+metal colour:black Package Contents: 1 x PCIe X1 to 8 SATA 3.0 card 8 x SATA cables 1 x SATA splitter adapter cable (1 to 4 SATA connector) 1 x low-profile bracket 1 x 15pin SATA splitter cable Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.