USB C PCIE Card: The USB PCIE card provides a internal 20pin USB 3.1 Type E Front Panel Header (can be DIY extended to the front panel USB 3.1 TYPE C for your computer). plug and play, easy installation. USB 3.1 Gen2 10Gbps High-speed: Using ASMedia ASM3142 master control, it allows you to quickly access your files with a transfer rate of up to 10Gbps, opens a of files in the work and play immediately without . Compatibility: Applicable interfaces: PCI-E 1X /4X /8X /16X. System support WIN8 WIN10 32BIT/64BIT LINUX. Supports the PCI-E 3.0 specification, PCIE 2.0 specification. Compatible with USB 3.1, USB 3.0 and USB 2.0. Aluminum Heatsink: Equipped with aluminum alloy heatsink, effectively dissipate the excess heat of the usb front panel adapter, so that the usb port card is always in a normal temperature state, working more stability and efficiency. High-quality Materials: This USB 3.1 card uses high-performance electronic components and metal panels, 4-layer PCB, increasing anti-interference and improve the stability of data transmission. Product Specification: Product Name: USB 3.1 TYPE-E Expansion Card Product Interface: TYPE-E 20PIN, PCI-E 1X(Compatible with PCI-E 2X 4X 8X 16X ) Product Chip: ASMedia ASM3142 Transmission Rate: 10 Gbit / s Support System: WIN8 WIN10 32BIT/64BIT LINUX. Product Features: This product can convert the PCIE high-speed data transfer interface of the computer into a TYPE-C 3.1 front-panel high-speed data transfer interface (TYPE-E to TYPE-C 10Gbps). Notice: 1. The motherboard must support PCI-E 3.0 to run to high speed. 2. Front TYPE-C interface, also called TYPE-E interface. 3. USB3.1 is very fast, ordinary hard drives just can't keep up that fast. Therefore, you need to use SSD with USB3.1 expansion card orsimple drive cable together to such high speed. 4. make the power has been cut off installation 5. Do not use in a humid environment, otherwise it will affect the connection of the device. 6. If the card does not work, first check whether there is a problem with the PCI slot on the motherboard. Colour: black, red Material: PCB+metal Package Contents: 1 * USB 3.1 Front TYPE-E Expansion Card 1 * Low Bracket Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.