This image transfer medium enables the user to transfer images from a paper document onto to a surface of your choice. Can be applied to wood, plaster, glass, metal, cardboard and more. Easy to use, apply three successive layers of the Image Transfer over a printed image, allowing 30 minutes between each layer. Allow to dry for 2 hours. Soak in warm water for a few minutes, and then pressing the image with your finger or using a damp sponge, rub gently to remove all paper, and leave only the image transferred to the varnish. The picture is now a transparent varnish. Allow to dry for 2 hours, and then cut more detailed if needed. Glue the transferred pattern onto the surface by applying a layer of Image Transfer on your intended surface.