[Excellent Adhesion]Easy to adhere to the printing , easy to remove the prints, flex slightly to your print right off. Excellent adhesion can be achieved when the temperature of the heated bed is about 60, PEI sheet without using any glue or other tools to help the model to stick onto the sheet. [Easy Removal]When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print.This is easily removed and flexible. Prints come off the easily when the temperature of the heated bed reaches room temperature. [Simple Installation]The 3 V2 PEI sheet is combined with 2 parts, a flexible PEO textured PEI on one side.Spring stainless steel, PEI powder sprayed on the , golden yellow on the back. Flexible, removable, and can stick to magnetics very well. High strength and heat resistance. [Wide Application]The size of 3 PEI is 235 x 235mm(9.25 x 9.25inch). After installing the print bed, please re-level it to improve the printing effect. , it is for 3D printers such as -3, -3 Pro, -3 V2, -3 S1, 3 S1 pro, 3 neo, 3 v2 neo, -5, -5 Pro, -20, -20 Pro, , C1, C2 and and similarly sized FDM 3d printers.Compatible with PLA/PETG//ABS and any other filaments. Color: As Shown Material: steel Package Contents: 1 x Spring Steel Sheet Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.