PID Temperature Controller Set K Type Thermocouple Heat Sink Relay Thermostat Holder for Farm Electric Power 25A Item Type: PID Temperature Controller Material: Plastic Model: REX C100FK07 V AN Measurement Accuracy: ±0.5%FS End to End Compensation Tolerance: 0-50℃ can be modified by software ±2℃ Resolution: 14 bits Sampling Period: 0.5 seconds Power Supply: AC100-240V 50 or 60HZ Process Value: PV Set Value: SV Output, Alarm and Self Tuning Can be Indicated by: LED PIN Control (including ON / OFF, step PID and continuous PID): Self tuning control Delay Output: Contact capacity 250V AC 3A (resistive load) Proportional Band (P): 0 - full range (when ON / OFF control is set to 0) Detection Temperature Range: 0 - 1300°C Insulation Resistance: >50M Ohm (500V DC) Insulation Resistance: 1500V AC/min Insulation Resistance: Power consumption <10VA Service Environment: 0-50℃ Non Corrosive Gas Environment: 30-85%RH External Size: Approx. 48 x 48 x 110mm / 1.89 x 1.89 x 4.33in K Type Thermocouple Probe Cable: Length: Approx. 1M/39in Sensor Diameter: Approx. 4.5mm/0.18in Temperature Range: 0-400℃ Inner Insulation: Glass Fiber External Shielding: Insulation Shielding SSR: Output Voltage Range: Standard type Input Voltage: DC 3-32V Output Voltage: 24-480V AC Heat Sink: Material: Aluminum Size: Approx. 80 x 49 x 50mm / 3.15 x 1.93 x 1.97in