Description: * brand new and high quality *adaptive to the filament, electricity saving lamp *This lamp is internal equipped with automatic body sensor. if poeple come. If people leave, the lamp goes off. *Internal body auto sensor adopts the infrared heat release device, and can accurately capture the low frequency signal in motion and automatically on. *When people leave, the lamp goes to auto dalay off, convenient and energy saving * Internal side of the turn is established with auto brightness detection circuit. only when the ambient brightness is less than the fixing value, the sensor will make sense and leave the lamp off. And it's energy saving Specification: *detection mode: light detection + light control *Rated: AC100-240V 50 / 60Hz *Output Mode: controllable silicon *Charging power: filament lamp ≤100W Lamp Saving electricity ≤30W LED≤18W * Detection distance: 1-5m (high temperature will influence the switch sensitivity) *detection angle: 110 ° *sensitivity to light: darkeness Attention *Turn off the power when the installation, must be installed by professional *This switch can work normally after 45 seconds when electricity, it is pre-heat Infrared Sensor time *Do not overload to use Package includes 10pcsxSensor Light Switch Note: 1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 2. Please allow slight manual measurement deviation for the data.