This Di Vapor polished chrome door pivot hinge is designed for use with glass doors and glass panels. The solid copper hinge weighs 385g and is manufactured to strict quality standards. It is commonly used by designers and architects. Sold individually—each order includes one hinge. **Technical Information – Dimensions:** Refer to the technical diagram in the product images section for detailed measurements. - Glass Thickness: 6–8mm - Material: Copper - Finish: Polished mirror chrome - Total width of fixing plate: 75mm - Distance between fixing holes: 66mm (maximum) and 28mm (minimum) - Fixing hole diameter: 8.7mm - Total height: 76.4mm **Fixing Hole Information:** One fixing hole connects to the shower glass door. The hole in the glass must be at least 8mm in diameter, as the bolt diameter is approximately 7.7mm. **Maximum Door Weight Load:** Each hinge supports a maximum weight of 25kg. Adhere to this limit when determining the number of hinges per panel. Typically, 2–3 hinges per side are used. The maximum recommended glass door width is 700mm. Typical installation requires two hinges—one at the top and one at the bottom of the glass screen. **Quantity:** 1 hinge per order **Tools Required:** 5mm Allen key and 2.5mm Allen key