Features： 1、RADIAL AND AXIAL LOAD: The two phase incremental encoder has radial load less than or equal to 30N and axial load less than or equal to 20N, and the protection level is IP50. 2、WEAR RESISTANT: Our incremental encoder is wear resistant, strong in load bearing capacity, robust and effective in protecting the main body of the gear box motor. 3、SAFE AND STABLE: Two phase incremental encoder is high temperature resistant and stable, which can be used safely. 4、COMPACT AND SMALL SIZE: Two phase incremental encoder is small in size, light in mass, compact in structure, easy to install, etc. 5、WIDE RANGE OF USE: Our encoder is suitable for intelligent control of all kinds of drainage measurement, automatic fixed length leather, automatic paper cutter, steel cutting length control, measuring height human scale and robot. Specification： Item Type: Encoder Material: Stainless Steel, ABS Operating Voltage: DC5-24V Output Mode: Push Pull Output F (PNP) Encoder Outer Diameter: Approx. 50mm / 2in Radial Load: ≤30N  Axial Load: ≤20N Starting Torsion: ≤2x10 Negative Cubic N.M Maximum Speed: 6000r/Min Rotational Inertia: 20g/Cm² Allowable Angular Acceleration: 2x10 biquadrate Rad/S Shock Resistance: 1000m/S².6ms Anti Vibration: 1000m/S².10-200Hz Operating Temperature: -10℃-+70℃ Storage Temperature: -20℃-+80℃ Relative Temperature: <RH85% Without Frost Protection Grade: IP50 Package List： 1 x Incremental Encoder 3 x Screw