PTC08 is an industrial-grade image acquisition and processing module that integrates image capture, shooting control, data compression, and serial transmission. Its built-in high-performance digital signal processing chip enables high-ratio compression of raw images. The output images adopt the standard JPEG format, ensuring easy compatibility with various image processing software.The module features a standard three-wire RS-232 communication interface and a simple image transmission protocol, allowing seamless connectivity with computers and embedded systems. Additionally, it includes a reserved infrared fill-light interface, which supports external infrared light panels for clear imaging under various lighting conditions.The PTC08 Serial Camera Module consists of two main parts: the module body and the serial connection cable. These two components are linked via a 4-pin 2.0mm pitch standard connector, which allows for easy plugging and unplugging.Module board size: 32mm x 32mmImage sensor type: CMOS 1/4 inchImage pixel: 300,000Pixel size: 5.6um x 5.6umOutput format: standard JPEG/M-JPEG.White balance: automaticExposure: automaticGain: automaticShutter: electronic rotary shutterSignal to noise ratio: 45DBDynamic range: 60DBMaximum analog gain: 16DBFrame rate: 640*480 30fpsScanning mode: progressive scanningMonitoring distance: about 10 meters. Max. 15m, adjustableImage size: VGA(640x480), QVGA(320x240)Serial port rate: 38400 by default and 115200 by maximum.Operating current: 75MAWorking voltage: DC +5VCommunication interface: RS232 (three-wire TX, RX, GND)Color:As ShownMaterial:PCPackage Contents:1 * Camera module1 * Cable