[" New and high quality r r Features:r 1.Use waterproof material and works under air pressure.r 2.Can be used to repair cuts and holes on inflatable boat, raft,kayak, canoe, above ground swimming pool, air/water bed/mattress,inflatable sofa and lounge, and water toys.r r Instructions:r 1.Deflate the product so the repair area is as flat as possible.r 2.Clean and dry the area thoroughly where repair is to be made. Note: To allow better adhesion on flocked surfaces, apply some glue to the repair area and rub away the flocked texture until a smooth surface is exposed.r 3.Use only enough liquid cement to wet the back to repair area. Note: Do not use too much cement, it will not seal properly.r 4.Press the patch firmly on the repair area and hold temporarily.r 5.If article is an inflatable, do not re-inflate for 12 hours.r r Specification:r Color: black+gray+bluer Material: PVCr Patches Size: 18.5cm(7.28in) 12.5cm(4.92in)r Wrench Size: 11.8cm(4.65in) 3cm(1.18in)r Glue: 30mlr Quantity: 1setr r Note: Please allow 1-3cm error due to manual measurement. please make sure you do not mind before you bid.r Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!r r Package includes:r 3 Patchesr 1 gluer 1 for Valve Wrench"]