1,Laser head move outward from center movement in the region of the Table-of-Contents, find location on the disk by emitting laser, induced resistance to accept to the reflected signal output into electronic data. 2,Laser head is a the essential part of CD drive, and also is the most sophisticated part.It is mainly used for data reading, so take special care when cleaning drive inside. 3,Laser head mainly includes laser generator (also known as laser diode), semi-reflective prism, objective lens, lens and photoelectric diode. 4,When laser head reads the data on disc, the laser light from laser generator goes through semi-reflecting prism and converges on the objective lens lens will make laser into extremely tiny points on CD. 5,Because of the reflection material on the disc, light will reflect back, through the objective lens, then illuminate on semi-reflecting prism. Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.