PWM DC Motor Controller with Remote 12V 24V 48V Adjustable Speed Forward Reverse

Function IntroductionFunction 1 - Soft start time setting: 000-100 (0-10 seconds) adjustable, default 1 secondFunction 2 - Soft stop time setting: 000-100 (0-10 seconds) adjustable, default 1 secondFunction 3 - Maximum Speed Scale Setting: 000-9990 (0-9990), default 100Function 4 - Speed lower limit setting: 000-9980 (0-9980) adjustable, default 0Function 5 - Speed upper limit setting: 000-9980 (0-9980) adjustable, default 100Note for Function 3, Function 4, Function 5: If the value exceeds 999 on the setting interface, the thousands digit will flash and the full value will not be displayedFunction 6 - Speed increase/decrease value setting: 001, 002, 005, 010, 015, 020, 025, 050, 100. Each press of the increase/decrease button adjusts speed by the selected valueFunction 7 - Power on start mode: Mode 1: Motor does not start when powered on; Mode 2: Motor starts when powered on, default Mode 1Function 8 - Total running time setting: 0~99:59:59 adjustable. When set to 0, no timing function is activated, default 0Function 9 - Forward rotation time setting: 0~99:59:59 adjustable, default 10 secondsFunction 0 - Stop time setting: 0~99:59:59 adjustable, default 10 secondsFunction A - Reverse time setting: 0~99:59:59 adjustable, default 10 secondsHour, minute, second switching: Long press the setting button for 2 seconds to switch between hour, minute and second adjustment for time-related settingsFunction E - Manual and automatic mode selection: Mode 1 is manual mode, in which Function 8, Function 9, Function 0 and Function A are disabled; Mode 2 is automatic mode, in which Function 8, Function 9, Function 0 and Function A are enabledParameterInput voltage: DC 6-55VMaximum current: 20ADisplay method: LCD color screenForward and reverse: bidirectionalSpeed regulation method: button and knobWireless remote control: YesSupported load: compatible with DC brushless motorInstallation method: embeddedWiring type: fence type terminalNet weight of product: 95g+25gProduct size: width 77mm x height 57mm x thickness 38mmOpening size: width 72mm x height 52mmMaterial: PlasticWiring InstructionsInput voltage must be within 6-55V DC, and the specific input voltage must be equal to the rated voltage of the connected motor1. Input power positive terminal2. Power negative terminal3. Motor positive terminal4. Motor negative terminalRemote Control Code MatchingLong press the setting button, then power on the device, then press any key on the remote control once. The backlight flashes twice to indicate successful code matchingFactory ResetEnter the settings interface, press and hold the setting button for 6 seconds. The backlight flashes twice to indicate successful restoration to factory settingsNoteAppearance may vary slightly between different product batches, which does not affect normal usePackage Contents1 x Speed Controller1 x Remote control