Remote Control for Ceiling Fan with Timer and Speed Adjustment Function

Cautions: When the new device cannot be remotely controlled, check whether the bar codes in the emitter and receiver are consistent, whether the indicator light on the emitter is working, whether the receiver cable is properly connected, and whether the buzzer beeps once when powered on. If the receiver cannot be controlled by the emitter, check whether the battery contact is normal and whether the power is sufficient. Replace the battery promptly when it is low. Insensitive remote control may be caused by environmental interference or low battery. Remove the battery when the device is not in use for an extended period. Wire the device strictly according to the parameters listed on the labels; improper wiring may shorten the device's lifespan or cause immediate malfunction. The antenna must not be connected to other wires. If there is a code switch on the fan, set the fan to the highest speed before using the remote control. The receiver emits a beep when the remote is pressed, which may be noticeable. Ensure sufficient space in the fan canopy or install the receiver accordingly.Operating Voltage: AC 90-220VWorking Frequency: 50-60HzRemote Control Distance: More than 20 metersSupport Encoding: 1527 learning codeOperating Mode: 1527 remote controlLoading Power:- Ceiling Fan: Max. 300W- Incandescent Lamp: Max. 1000W- LED / Energy-saving Lamp: Max. 200WDo not overload.Remote Control Battery: 2 AAA batteries required (not included)Type: 220V/110VColor: White + BlackMaterial: PlasticPackage Contents:1 x Controller1 x Remote Control1 x Wall MountNote: Lighting and display differences may cause slight color variations between the image and the actual item. Measurement error allowance is +/- 1-3 cm.