1. [Operating frequency] This RF low noise amplifier LNA is 50-4000MHz, NF = 0.6dB 2. [Application] It is commonly used as a high frequency or intermediate frequency preamplifier for various radio receivers, as well as an amplifying circuit for high sensitivity electronic detection equipment 3. [Wide use range] This LNA for primary mobile communications base station infrastructure applications such as wireless communication transceiver cards, tower amplifiers, combiners, repeaters and remote/digital wireless broadband terminal applications 4.LNA RF Amplifier] This is an LNA RF amplifier with a low noise figure that produces lower noise and distortion while amplifying the signal 5.[improve the signal-to-noise ratio] In the case of amplifying a weak signal, the noise of the amplifier itself may be very severe, so it is desirable to reduce this noise to improve the signal-to-noise ratio of the output<br><br>Ultra-low Noise Figure = 0.60 db at 900MHZ Gain = 18.7db at 900MHZ High Linearity: OIP3 39.5dbm at 1960 MHZ P1db = 22.7dbm at 1960 MHZ Single-supply Operation: 5V at IDO = 90MA Flexible Biasing Options: 3V to 5V, Adjustable Currents Broadband Internal Matching Cellular, PCS, W-CDMA, ISM WIMAX Receivers PA Driver Amplifier Low Noise, High Linearity Gain Block Applications Colour:green Material:PCB+metal Size:5 x 2.5 x 1cm<br><br>Package Contents: 1 x RF Amplifier<br><br>Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.