RGB CPU Cooling Tower Fan for Raspberry Pi, 0.4W DC 5V Case Cooler with Ice Effect

¥6,390
+ 配送料¥1,649

RGB CPU Cooling Tower Fan for Raspberry Pi, 0.4W DC 5V Case Cooler with Ice Effect

  • ブランド: Unbranded

RGB CPU Cooling Tower Fan for Raspberry Pi, 0.4W DC 5V Case Cooler with Ice Effect

  • ブランド: Unbranded
希望小売価格: ¥10,390
価格: ¥6,390
得する金額: ¥4,000 (38%)
販売元:
¥6,390
+ 配送料¥1,649

在庫あり

以下の支払い方法を利用することができます

説明

Item Type: CPU Cooling Fan Product Material: Plastic + Brass Function: Heat Dissipation Rated Power: 0.4W Current: 0.08A Package List: 1 x CPU Cooling Fan 4 x Nut 6 x Screw 8 x Standoff 2 x Buckle 4 x Washer 1 x Plastic Plate 1. During the use of the cooling fan, please do not touch the blades and the power cord around the fan or pull the power cord, which will damage the shaft and the power cord. 2. When using the cooling fan, please avoid the entry of dust, water droplets, and small insects, which will affect the service life and cause malfunctions. 3. Do not use the cooling fan in flammable gas or any harmful environment to prevent explosion or damage. 4. Please use the cooling fan within six months after purchasing. Long-term storage will affect the performance of the fan due to the storage environment. 5. When the cooling fan is in operation, please do not attempt to lock the fan for a long period of time. This will cause the fan to be burned out due to continuous stoppage and high heat generation. 6. When installing the cooling fan, please pay special attention to the noise caused by resonance or vibration. 7. During transportation or operation, if the cooling fan falls from a height of 60cm, it will have a certain impact on the balance of the blades, especially the ball bearings; avoid dropping. 8. The screw torsion should not exceed 4Kgf when the shell of the cooling fan is locked; please do not use screwdrivers, iron rods, etc. to block the fan, as this will damage the fan. 9. Please be careful not to put your fingers in the cooling fan when it is running at high speed to prevent injury. This CPU cooling fan is compatible with Raspberry Pi 3 and Raspberry Pi 4. It can reduce the temperature of the Raspberry Pi from 80C to 40C under overclocking conditions. Features a 35mm brass tube, multilayer radiator, and 7-blade powerful fan blades for faster heat dissipation. An RGB cooling fan that efficiently dissipates heat while enhancing the appearance of your device. Easy to install with compact size and light weight; 0.4W rated power helps conserve energy.
  • Fruugo ID: 405733316-860385263
  • EAN: 1195709833741

製品安全情報

以下に概説するこの製品に固有の製品安全性情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

安全上の警告: Please use according to the instruction manual

配送と返品

2日間以内に発送

  • STANDARD: ¥1,649 - 間の配達 木 27 11月 2025–木 04 12月 2025

中国より発送。

ご注文の商品は、お客様の仕様に従い、万全の状態で配送されるように最善を尽くしています。しかし、もし注文に抜けがあったり、注文したものと違う商品が届いたり、注文に満足できないその他の理由がある場合は、注文全体やその中のいずれかの商品を返品し、その全額の返金を受けることができます。 全額返金ポリシーを見る

製品コンプライアンスの詳細

以下に概説されているこの製品に固有のコンプライアンス情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

製造業者:
次の情報は、Fruugoで販売される関連製品の製造業者の連絡先詳細です。

  • Wu Jiayue
  • Guangzhou Marvel Trading Co., Ltd.
  • Room C1839, 1002, No. 80, Modaonan Street, Yongtai, Yongping Street Baiyun District
  • Guangzhou
  • CN
  • 510420
  • jici5016queyimi14@163.com
  • 15625617795

EUにおける責任者:
次の情報は、EUにおける責任者の連絡先情報の概要です。ここで言う責任者とはEUに拠点を置く指定経済事業者で、EU域内で販売される関連製品に関するコンプライアンス義務を負う者のことです。

  • Van Lavazza
  • Y & H S.R.L.
  • Via Gravina 21 MT matera,Trani,Puglia
  • Trani
  • Italy
  • 75100
  • itlyhsrl@gmail.com
  • 0039 3917722149