Features MAIN FUNCTION: SA6 is a simple portable spectrum analyzer and signal source designed to display the signal spectrum in the frequency range of 35 to 6200 MHz. The analyzer identifies the amplitude and frequency of the spectral components of the analysis MULTIFUNCTIONAL: The spectrum analyzer can process signals from all widely used technologies, such as Wi Fi, 2G, 36, 4G, LTE, CDMA, DCS, GSM, GPRS, GLONASS, etc. ADDITIONAL FUNCTION: Allows you to measure the frequency response of passive or active devices (such as filters or amplifiers). This software allows you to measure SWR and reflection loss modules. This requires an external directional coupler and a se MAINLY USED FOR ON-SITE OPERATION: The equipment is robust and durable, lightweight and low power consumption. Allows service center and maintenance workshop to perform on-site analysis for debugging and repair work. Additionally, spectrum analysis PERFORM THE FOLLOWING OPERATIONS: Place an external antenna on the base station, quickly scan the RF environment, check the relay cell for proper operation, repair and adjust relays, generators, filters, etc. Measure SWR when using an external dir Feature: 1. 2 CONTROL METHODS: via device buttons and touch screen. Data between the analyzer and PC is transmitted via USB cable. All measurement data is displayed in real time on the screen of the device or PC. Specification: Item Type: Spectrum Analyzer Material: aluminum alloy Mode: SA6 Performance Settings: 3.2-inch resistive color touchscreen Wide frequency range: 35 to 6200 MHz Fast frequency range scan: 500 points per point High measurement accuracy: 2 dB in the dynamic range of 70 to 75 dB Compatibility for Windows computers Can operate the device using a PC Extremely convenient to use Independent power supply for up to 4 hours of uninterrupted operation, wired data transmission to PC Specifications: Display frequency range: 35-6200 MHz Measuring frequency range: 35-4500 MHz Dynamic range 35 to 3000 MHz: 75 dB Dynamic range 3000 to 4500 MHz: 70 dB Maximum range: 6165 MHz Bandwidth: 200 kHz, fixed Scan speed for frequencies above 100 MHz: 700 MHz/sec 100 MHz scan: less than 0.25 seconds Background noise up to 3000 MHz: less than -100 dBm Background noise 3000-4500 MHz: less than -95 dBm Background noise 4500-6200 MHz: less than -90 dBm Wave impedance: 50 ohms Package List: 1 x spectrum analyzer 1 x resistive stylus 1 x USB Type C Data Cable 1M/3.3ft 2x 30CM/11.8IN SMA Extension Cable 1 x SMA KK passed 1 x Manual Package List 1 x Spectrum Analyzer 1 x Resistive Stylus 1 x Type C USB 1M/3.3FT Data Cable 2 x 30CM/11.8in SMA Extension Cable 1 x SMA KK Passed 1 x Manual