Rotary Screw Adjustable GPU Holder Graphics Card Support Video Card Sag Bracket

Telescopic helical design. The graphics card bracket adopts a telescopic screw design. The GX-30 Plus can provide a height support range of 74-120mm. The height can be adjusted freely, compatible with various specifications of the chassis. Provide support for the rear of the graphics card and escort the graphics card.Aluminum-alloy material. Aluminum alloy provides lasting support, sturdy. The surface is sandblasted and anodized for a texture that lasts.Provide support protection. The surface of the support point of the top graphics card is attached with a silicone gasket to avoid bumping the graphics card. The bottom of the graphics card bracket is designed with a magnet + silicone sheet, which can be adsorbed on iron materials such as the power supply compartment and the chassis bottom plate, which can be firmly adsorbed and provide support.Non-slip and stable magnetic suction. There are non-slip rubber pads at both ends, which is for users to install and stand firmly in the chassis to avoid bumping the graphics card. The bottom is designed with magnetic suction, which can be adsorbed on iron materials such as power supply compartment and chassis bottom plate, and can be firmly adsorbed and provided support.Instructions for use of the rotating screw: After rotating the telescopic screw counterclockwise to the required support height, then rotate the middle fixing ring clockwise to the end, and lock it.Name: Graphics card protection bracketModel: GX-30 PlusSurface treatment: sandblasting processSize: GX-30 Plus: 74x15mm/2.91x0.59inch, extendable to 120mm/4.72inchWeight: GX-30 Plus: 35gColour: blackMaterial: Aluminum alloyPackage Contents: 1 x Graphics Card GPU Holder