Features: 1.Protection Rating: Our fuel level sensor has an IP67 protection rating and an alarm switch rating of 500mA. 2.316 Stainless Steel Material: The fuel tank sending unit is made of heavy duty 316 stainless steel. The craftsmanship is exquisite, the cable is made of PVC and the float is made of NBR. 3.Reed Switch: This water level sensor is a reed switch, durable and reliable, with stable output signal. The tank does not need to be adjusted. 4.Widely Applied: The fuel level sensor is suitable for boats, cars, trucks, buses and marine areas. Suitable for oil level meter, water level meter and any unadulterated liquid. 5.Easy to Install: The fuel level transmitter comes with washer, mounting screws, written and illustrated instructions, and easy to understand wiring instructions. Specification: Item Type: Fuel Level Sensor_x000D_ Material: _x000D_ Main Unit: 316 stainless steel_x000D_ Cable: PVC_x000D_ Float: NBR_x000D_ Mounting: Standard SAE 5 hole type_x000D_ Screw Size: M5 x 0.8_x000D_ Hole Diameter: 5mm / 0.20inch_x000D_ Product Specification: Approx. 150mm / 6in_x000D_ Recommended Tank Size: Approx. 160-178mm / 6.3in-7in_x000D_ Output Signal: EU standard 0-190ohms (0ohms at no load, 190ohms at full load)_x000D_ Resolution Range: Approx: 10mm/0.39in_x000D_ Fuel and Water Level Sensor Type: Resistance_x000D_ Alarm Switch Rated Current: 500mA_x000D_ Protection Level: IP67_x000D_ Operating Temperature: -40F - +185F (-40C - +85C)_x000D_ Application: Ship, Yacht, Truck, RV PackageList: 1 x Fuel Water Level Sensor 5 x Screw 1 x Washer Note: The installation will take about 15 minutes total to get your power meter working again. To keep the transmitter from hitting the bottom of the can, the length of the transmitter should be 1in less than the depth of the can if it is a plastic can, or 0.5 less than the depth of the can if it is a plastic can.