1. Comply with SAE J1772 standard<br> 2. Beautiful appearance, with protective cover, support front installation<br> 3. The pin head is designed with safety insulation to prevent accidental direct contact with human hands.Excellent protection performance, the protection level reaches IP54<br> 4. Type: European change American Adaptor<br> 5. Use: EV charging<br> Mechanical behavior:<br> 1. Mechanical life: no-load plugging and unplugging 10000 times<br> 2. Insertion force during coupling: 45N Less than 80N<br> Electrical performance:<br> 1. Rated working current: 16A or 32A<br> 2. Working voltage: 110V~250V<br> 3. Insulation resistance: 1000M (DC500V)<br> 4. Terminal temperature rise: Less than 50K<br> 5. Withstand voltage: 2000V<br> 6. Contact resistance: 0.5m Max<br> Ambient temperature:<br> 1. Working environment temperature: -30~+50<br> We recommend to use the following steps:<br> 1.Plug in the Type 2 end of the adapter to the charging cable<br> 2.Plug in the Type 1 end of the adapter to the car's charging socket<br> 3.After the adapter has clicked in place you are ready for the chargex<br> Don't forget to activate the charging station<br> When you finish with the charge, disconnect the vehicle side first and then the charging station side. Remove the adapter from the charging station when not in use.<br> Material:thermoplastic<br> colour:Black<br> Package Contents:<br> 1 x Electric Cars Charging<br> Only the above package content, other products are not included.<br> Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.<br> Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement. Sold by-DIMEANI official store