1. USB 3.0 to SATA IDE converter allows you to connect 2.5Inch/3.5Inch Ide/SATA hard disks through USB port to computer. This is a perfect tool to duplicate, copy, backup or transfer large amounts of data from one drive to another. It has a SATA II connector and two IDE connectors (40pin and 44pin) 2. Support all 2.5/3.5 inch SATA/IDE HDD and 5.25 inch CD/DVD ROM CD-RW,COMBO,DVD-RW.DVD-RAM adapter 3. This SATA/IDE to usb adapter supports transfer rates of up to 5Gbps - The actual transmission speed is limited by setting of device connected; Downwards compatible with USB 1.1/2.0 4. On/Off Switch for HDD protection. 5. DC Power Supply 12V for 3.5Inch devices. LED activity indicator, Plug & Play, simple, reliable and stable. Huge Capacity Supportive - Up to 6TB capacity of drives supported. The LED indicator of USB to SATA adapter can monitor working status. Plug and play, Easy to use. WideCompatible: This IDE SATA adapter is universally compatible with for 10/8.1/8/ 7/Vista/XP, for OS 9/10, for Linux etc. Hard drive converter can support offline clone. No computer is needed! Just press "CLONE" button for 3 seconds until first blue light (25%) flashes. You can operate offline clone only in 2 combinations: IDE Source+SATA2 Target; SATA1 Source+SATA2 Target. Capacity requirement: SATA2 Target equal IDE/SATA1 Source. Plug Type:EU Plug,it applies to Indonesia, Germany, France, Spain, Italy and so on. Voltage:AC 220V Colour:Black Material:Plastic Package Contents: 1 * SATA/IDE Connection 1 * USB 3.0 Cable 1 * IDE 4P Cable 1 * 2.5 IDE Transfer Card 1 * Power Cable Only above package content, other products are not included. Note: Light reflection and different displays may cause color of item in picture a little different from real thing. The measurement allowed error is +/- 1-3cm.