1080P Video Capture Card USB 3.0 USB2.0 SDI-compatible video Recorder Camera Recording Live Streaming. The video capture can capture both SDI-compatible video and audio, sending audio and video signals to computers and push online live broadcast platforms. Suitable for high definition acquisition, teaching recording, medical imaging, etc. Please note before purchasing that this device only supports SDI and cannot support AHD TVI CVI CVBS signals. Support input :SDI ; output interface : USB3.0. Support output max resolution 1920x1080P,1600 x 1200P,1360 x 768P,1280 x 1024P,1280 x 960, 1280 x 720P, 1024 x 768P,800 x 600P,720 x 480P, 720 x 576P, 640 x 480P; Support Frame rate;5-60FPS select. Support audio and video capture : standard UVC/. Drive : NO need to install the driver , plug and play; Support and Linux, android ; Conform to USB Video and UVC standard; Conform to USB Audio standard; Without external power supply, compact and portable. allowed for capture, commonly used acquisition software : OBS/potplayer( ) SDI Capture is an audio and video capture device that supports SDI signal input and USB interface output to the computer. It is a cost- effective audio and video capture card that complies with UVC/ specifications. The mission interface is USB3.0. This machine is compatible It is a plug-and-play, USB drive-free high-definition video capture tool for , Linux, and Android. SDI Capture converts SDI signals such as computers, embedded systems, medical equipment, scientific or laboratory equipment into USB signals, and completes and recording of SDI signal video through computers, and other equipment. It also supports lossless loop out and sup ports Microphone synchronized audio input. Products are commonly used in of security, medical equipment video capture, corporate video conferencing, education, and are compatible with OBS, POTPLAYER, AMCAP, VLC and other capture software. INSTRUCTIONS FOR USE. . 1. Connect the signal source to the sdi input interface of the capture card, if you need the loop out function, you can connect to the looping out interface 2. The USB output of the capture card is connected to the computer through a USB cable, or an OTG converter is added to the mobile phone (drive-free) 3. For audio input, connect the audio signal to the mic in interface 4. Open the acquisition software on the acquisition computer, select the device AFN_ Cap video and activate it. At this time, the red LED light flashes, indicatin that the signal acquisition is successful. Color: Black Material: Aluminum Alloy Package Contents: 1 * SDI Converter Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.