Bleed kit for Seastar hydraulic steering - bridge tube includedCompatibility: Fits for seastar hydraulic steering systems.<br> Used for refilling your boat's steering system fluid.<br> Advantages<br> 1.Used for refilling your boat's steering system fluid.<br> 2.Standard Seastar helm to bottle fitting - do not pierce bottle<br> 3.Custom bridge tube connects bleed ports on steering cylinder.<br> Installation Instructions:<br> 1.Attach bottle to helm reservoir (do not pierce bottle)(do not let bottle run empty)<br> 2.Connect bridge tube to bleed fittings on steering cylander and loosen/open fittings.<br> 3.Use helm to pump fluid through system by turning the wheel in one direction. Air bubbles will be pushed to the reservoir at the helm.<br> 4.Manually swing the outboard through full articulation to relieve trapped air and confirm good bleed.<br> 5.Note: Orientating bleed fittings up while pumping fluid with helm will allow air to escape cylinder.<br> 6.Repeat 3-4 as nessasary until no air is visible in bridge tube.<br> 7.Tighten bleed fittings before removing bridge tube.<br> Package Included:<br> 1 set x Boat Bleed Kit Filler Kit