Smart Button Pusher with App Control and Remote Scheduling, Wireless Smart Switch Robot for Home Devices

Finger Robot Switch is a compact motorized button pusher that converts traditional pushbutton devices into appcontrolled smart devices. It lets you add remote control and scheduling without replacing existing switches or appliances. Key benefits Retrofit instead of : Add smart control to existing pushbutton switches, garage door openers, cleaning robots, and other devices without buying equipment. Remote control and scheduling: Compatible with Smart Life app for remote on and off, and for creating scheduled actions. Simple installation: Supplied adhesives let you mount the unit wherever needed. No wiring required. Portable and lowmaintenance: Lightweight and battery powered, with a replaceable CR2 lithium battery included. Main features Motorized finger actuator that physically presses a button on command. Touch control buttons for manual operation on the device. Compact ABS housing and a weight of approximately 48 g 1.7 oz for unobtrusive mounting. Powered by one CR2 lithium battery 200 mAh, included in the package. Compatible with Smart Life app to enable remote control and scheduled actions. Specification Item Type: FingerRobotSwitch Material: ABS Weight: Approx. 48 g 1.7 oz Battery: CR2 lithium battery 200 mAh included Controls: Touch control buttons What you get 1 Finger Robot Switch 2 Fixing glue pieces for installation Typical use scenarios Start a sweeping robot remotely: Attach the switch to the robot power button so you can start or stop cleaning from the app. Open a garage door on arrival: Mount the pusher on a traditional garage door opener to trigger the opener at a preset time when you arrive home. Add smart control to appliances: Use on coffee makers, lamps, or wallmounted pushbutton controllers to schedule or remotely activate devices while keeping the original controls intact. Installation tips and notes Clean the mounting surface before applying the supplied fixing glue for adhesion. Position the actuator so it reliably contacts the target button without binding. the CR2 battery when manual operation or response time becomes sluggish. No need to existing devices; install this unit on your traditional switch to enable smart control through the app.