Smart programmable power outlet with 6-hour timer for USB interface. EU compatible.

Description and Functionality: This outlet is a standard converter with two power outputs: a 5V 2A USB port. It allows you to use electrical appliances and simultaneously charge digital devices such as phones, tablets, MP3/MP4 players, etc. Compatible with all international mains voltages, its no-load power consumption is less than 0.3W. It is protected against short circuits, overloads, and overvoltages for added convenience and energy savings. Specifications: Model Number: TMUSB01. Dimensions: 108.5 x 54 x 69 mm. Maximum Power: 3680W. USB Output: 5V 2.1A. Operating Voltage: 180-260V AC. Frequency: 47-63Hz. Operating Current: 16A. Charging Time: Countdown timer from 1 to 10 hours. Protection level: IP20 Operating temperature: 0°C to +40°C Timer accuracy: ±3 min. Minimum switching time: 1 hour Timer socket with 2 USB ports 5V 2.1A for charging Plug type: EU plug. Compatible with Indonesia, Germany, France, Spain, Italy, etc. Voltage: 220V AC Color: White Material: Plastic Timer setting: 1. Press the power switch once: the "1 HOUR" LED illuminates. The timer switches to ON mode, and the USB and control socket outputs are activated. 2. Press and hold the power switch: the LED illuminates, the countdown timer activates, and the LED cycles through the following intervals: 0.25 h, 0.5 h, 1 h, 2 h, 4 h, 6 h. 3. Select the desired countdown mode. The mode LED illuminates and the countdown begins. Once complete, the control output and USB port turn off. 4. The countdown then begins. The time indicator LED automatically cycles from high to low until the countdown finishes. Troubleshooting: 1. Check that the power connection is correct. 2. Check that the USB cable is securely plugged in. Warnings: 1. Use only indoors and in a dry location. 2. The maximum load must not exceed 16 A (3680 W). 3. This product does not convert voltage. Do not misuse. Do not exceed the maximum load of 3680 watts (16 A). 4. Always connect the device to ground.