CN3065 Solar Battery Charging Board with Up to 500 Milliamp Current, 4.2 V Termination, USB Port, and XH2.54 Terminals Multicolor

Features: Two Charging Inputs: Solar and Type-C input connections with automatic switching keep a supported single-cell battery project powered when either source is less practical. Defined Charging Control: The CN3065 controller supports up to 0.5A charging current and cutoff at 4.2V for a clearly specified power profile. Clear Connection Layout: XH2.54 plug-in connectors separate solar input, battery, and load output paths, making each project connection easier to identify. Single-Cell Battery Profile: Designed for a single-cell 3.7V rechargeable cell with a 4.4-6V solar input window for selecting the supported electrical setup. Wiring and Input Boundaries: Route the solar, battery, and load leads to their designated terminals and keep solar input within the stated 4.4-6 V window. Specifications: Component:ABS Size: Approx. 2x4cm / 0.79 x 1.57inch Main control chip: CN3065 Charging current: 500mA Solar input voltage: 4.4V-6V Charging interface: Type C Adapted battery: single 3.7V battery, with full charging cut-off of 4.2V PCB color: Blue Package Includes: 2 Optional Package: Package 1 Include:1Pc Power Management Board Package 2 Include:2Pcs Power Management Board Package 4 Include:4Pcs Power Management Board note: 1.Please allow 1-2cm errors due to manual measurement, make sure that you donot mind before you order. 2.Due to the differences between different monitors, the picture may not reflect the actual color of the item.