Name : HomeYaRuiOrigin : CN(Origin)Model Number : Solar Drip Irrigation System DeviceMaterial : PlasticType : Watering KitsSolar Battery : 1200mAhPower : 2WVoltage : 4.2VPower Supply : Solar power / USB power (battery not included)Host Size : 120*43*89mmFunction : Pump Controller Watering DeviceStyle 2 : Solar Drip Irrigation Watering ToolsStyle 1 : Garden Drip Irrigation SystemWater Supply Mode : double pump, single pumpMaterial : ABSSolar Auto Drip Irrigation System Kits Water Pump Controller Timer Outdoor Indoor Garden Greenhouse Plant Agriculture Watering ToolsProductParameters:Name: Double pump watering timerHost size: 120*43*89mmPower supply: Solar powered / USB powerbattery not includedPower: 2WSolar battery: 1200mAhInput voltage: 4.2V-5VMaterial: ABSWaterproof grade: PI67 rainproofWater supply mode: double pump, single pumpTRAIT:(1) Built-in lithium battery, solar and UBS dual-mode charging.(2) Double pump water supply, can be switched to single pump, can adjust the output water size to meet the needs of different flowers.HIGH QUALITY MATERIAL:Made of engineering plastic ABS, PEEK, silicone, the watering timer is wear-resistant, high temperature resistant, corrosion resistant, sun-proof, anti-aging, durable and has long service life.INTELLIGENT TIMER:Using an automatic irrigation system, the timer not only reduces labor costs, but also effectively makes use of water resources, improve irrigation efficiency, realize automatically and regularly irrigating flowers and plants even no one is at home to improve plant survival rate.Manual for Double Pump Watering Timer).Switch NO/OFFPress and hold the key for three seconds to complete the power on/off function.Manual mode:Press the button, the indicator on the display will light up, and then press to switch to select pump A or pump B and pump AB. At the same time, press the button again. The pump starts to work; at the same time, it starts to count the manual working time in seconds.During the setting process or when the pump is working, press the key to exit the manual mode.. Function settingsPress the keyboard key to enter the function setting, the menu is as followsThe function in the box is selected, continue to press the key, the box will cycle from top to bottom to select the corresponding function.1. Pump selection settings Press key to select A, B, AB to select the pump currently to be set. When AB is displayed at the same time, set the two pumps to be at the same setting at one time.Press key again to enter the next menu, the following is the same, and will not be repeated.2. Loop mode Press the key to select to choose cycle by day or cycle by hour.(1) Hourly cycle: The water pump works every corresponding hour.(2) Daily cycle: work at the corresponding time point every day. There are three time points to choose from. If you don& 39;t need 3 time points, you can set the time to be the same as the previous one.3. Cycle time(1) Hour cycle: it can be set from 0 to 999, press to select the corresponding number, press to skip to the next digit.(2) Cycle by day: Programmable time 1 when entering the menu, set the corresponding time (24-hour mode), jump to the next position, and press to enter programmable 2 after completing 4 digits. in this way4. Working hoursRefers to the working time of the pump during circulation can be set to 0-9999, the unit is second.(1)Hour cycle: There is only one set of parameters, and the setting method is the same as "Cycle Time".(2) Cycle by day: When entering the menu, it is the working time corresponding to programmable time 1, and after completing 4 digits, press to enter programmable 2 So cycle.5. Clock settingSet the watering device system time, generally set to the local standard time, the setting operation method is the same as the "circulation by day" of the "circulation time".6. Save and exitIn this option, press the key to exit the setting, store the new setting parameters and update the system settingIf there is an hourly circulation function in the A and B pumps, the water pump starts to work, and this point in time is recorded as the start time of the cycle.other instructionsWhen the water pump is working under the timing function, RUN TIME is displayed, and the number above is the countdown of the running time of the water pump in seconds.When the watering device is in the standby state, it displays COUNTDOWN MINS, which is the countdown to the next water pump running time, in minutes. When this count is 0, the water pump starts to work.In manual mode, the upper digit counts up, showing the number of seconds the pump has been working.",