SP110E Bluetooth Pixel light Controller WS2811 WS2812B ws2812 dimmer SK6812 RGB RGBW APA102 WS2801 pixels Led Strip IOS Android 1. Bluetooth Remote Control. iOS and Android APP remote control via Bluetooth ; iOS 10.0 or Android 4.4 or later edition required. 20m Long distance remote control; convenient to use. Your smart Phone should support Bluetooth 4.0 or later version. 2. Wide Compatibility Support all the LED driver ICs, such as WS2811,WS2812B, SK6812, SK6812-RGBW. But there is no WS2812B option on the setting page, please choose WS2811 when connect it to WS2812B LEDs. 3. Rich color modes: design by adding IC in strip lights, you can control a variety of colors, brightness and chasing speed as you want; built-in 120 Kinds of color chasing modes looks like recurrently chasing, skipping, dancing, twinkling on the strip, give you an amazing visual experience; you also can mark your favorite chasing effect and only display the effect you mark; If you do not want the chasing mode, you can DIY a static color for lighting. 4. User-friendly design: support setting IC types, RGB sequence and pixels number, control up to 1024 pixels in total. Save user setting when power off. DC 5V~12V wide working voltage; reverse connection protection; hot swap protection. 5. Warnings: The controller can not regulate the output voltage at the VCC. That means the output voltage of your power supply must be the same as the work voltage of your led lights. If your lights need 5V input, please use a 5V power supply, never use 12V power supply. Otherwise, your lighes will be damaged