- Absolute maximum input level without attenuation is +10 dBm, protecting downstream stages from overload during normal operation. - Absolute maximum input with 30 dB attenuation for short duration is +20 dBm, enabling safe handling of transient overload events. - Input point for third-order intermodulation (IIP3) with 0 dB attenuation at +15 dBm, useful for distortion analysis and nonlinear characterization. - 1 dB compression point (P1dB) at +2 dBm with 0 dB attenuation, defining the linear operating range and gain compression behavior. - Power detector resolution of 0.5 dB and linearity within +/-1 dB across the measurement range, enabling accurate monitoring of signal power. Use scenarios - RF test benches: characterize amplifiers and mixers, monitor power levels, and assess distortion without exceeding input limits. - Transmitter chain calibration: evaluate IIP3 and compression points to optimize linearity and headroom. - Field or benchtop power monitoring: quick, reliable power checks and distortion assessment with precise detector resolution.