StackChan Core for StackChan Robot ESP32-S3 16MB Flash 8MB PSRAM Wi-Fi+BLE with 2inch Touchscreen for StackChan Repair

Specifications: The StackChan Core serves as the central controller for the StackChan robot and is suitable as a replacement unit for the main controller. Powered by an ESP32-S3 chip featuring a 240 MHz dual-core processor, it includes 16MB of Flash and 8MB of PSRAM, with native support for Wi-Fi and BLE wireless communication. The device integrates a wide range of peripherals: a 2.0-inch capacitive touchscreen with high-strength glass and a 0.3 MP camera, along with proximity, ambient light, and 9-axis attitude sensors. It also features a microSD card slot, a built-in 1W speaker, dual microphones, and physical power and reset buttons. Designed to replace the original main unit, it is fully compatible with the StackChan AI desktop robot. SoC: ESP32-S3 (Dual-core Xtensa LX7 processor, 240 MHz) Flash: 16 MB PSRAM: 8 MB Quad Wi-Fi: 2.4 GHz Wi-Fi Touch IPS LCD: 2.0" @ 320 x 240 (ILI9342C) Camera: GC0308 @ 0.3 MP Proximity Sensor: LTR-553ALS-WA PMIC: AXP2101 6-axis Motion Sensor: BMI270 3-axis Magnetometer: BMM150 RTC: BM8563 Speaker: 16-bit I2S with AW88298 amplifier (1 W) Audio Codec: ES7210 (dual-microphone input) Note:The StackChan Core comes pre-installed with the StackChan firmware. Color: As Shown Material: Glass+ABS Package Contents: 1 x StackChan Core 1 x L-shaped hex key, 1.5mm (for M2 screws) 1 x L-shaped hex key, 2.5mm (for M3 screws) Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.