Stainless Steel Deep Hook Suction Cup

Physical specs: ~8.5 cm (height) × 5.5 cm (width) × 6 cm (depth); mass: 120 g; certified load capacity: up to 5 kg. Main body fabricated from brushed stainless steel — chosen for inherent resistance to moisture-induced degradation, easy wipe-clean maintenance and enduring aesthetic clarity. Suction base combines resilient PVC shell with a dedicated 2 mm soft-gum interface (pure mechanical adhesion — no glue, tape or solvent-based bonding agents), engineered to maximise contact area and vacuum retention on flat, impervious surfaces. Demonstrated reliability in frequently wet locations: shower screens, vanity mirrors, kitchen windows and stainless steel appliance fronts. Installation surface must be smooth, non-porous, flat, dry and contaminant-free — confirmed working on float glass, mirrored surfaces, vitreous china, glazed ceramic, acrylic sheeting, polished stainless steel and Corian®. Does not bond to latex-painted walls, gypsum board, raw brick, natural stone, textured finishes, wallpaper, frosted glass, silicone-sealed edges or grouted tile joints. Fits seamlessly into modern living: install in under 10 seconds using palm pressure and simple twist — no hardware, no mess, no commitment. For reuse, wash suction cup with warm water, air-dry completely, then remount. A thoughtful answer to the growing need for flexible, responsible, and aesthetically coherent home organisation — especially where permanence isn’t an option.