Stepper CNC Controller Motor Module Subdivision 42/57 32 TB6600 Driver Control
- ブランド: Unbranded
販売元:
Stepper CNC Controller Motor Module Subdivision 42/57 32 TB6600 Driver Control
- ブランド: Unbranded
現在在庫なし
14日間返品ポリシー
販売元:
現在在庫なし
14日間返品ポリシー
支払い方法:
説明
Stepper CNC Controller Motor Module Subdivision 42/57 32 TB6600 Driver Control
Feature:
1. Control signal input voltage is 3.3V‑24V general, 32 kinds of subdivision accuracy are optional.
2. H‑bridge bipolar constant current drive, input signal high‑speed optocoupler isolation.
3. Built‑in temperature protection and over current protection, automatic half current to reduce heat.
4. Motor noise optimization function, low noise, not easy to disturb the people.
5. Small size, easy to carry and store, convenient to use and with good performance
Specification:
Item Type: Driver Controller
Power Supply Voltage: DC 9-42V power supply (12-24V recommended)
Current: The output current can get 4.0A (suitable for 57, 42 stepper motors of 1.8NM and below)
Cooling Method: Natural cooling or forced air cooling.
Use Occasion:
(1) Do not place it near to other heat-generating equipment, avoid dust, oil, corrosive gas, excessive humidity and strong earthquakes.
(2) Combustible gas and conductive dust are prohibited.
Humidity: 40-90%RH
Vibration: 10-55Hz/0.15mm
Storage Temperature: -20-65℃
Package List:
1 x Driver Controller
Note:
- ブランド: Unbranded
- カテゴリー: 変周波数駆動装置
- Fruugo ID: 486365082-1007749522
配達
3日間以内に発送
中国より発送。
返品
ご注文の商品は、お客様の仕様に従い、万全の状態で配送されるように最善を尽くしています。しかし、もし注文に抜けがあったり、注文したものと違う商品が届いたり、注文に満足できないその他の理由がある場合は、注文全体やその中のいずれかの商品を返品し、その全額の返金を受けることができます。