UCAN is a small low-cost open source USB to CAN adapter, compatible with CANable hardware. The UCAN enumerates as a virtual serial port on the computer and acts as a serial-line for the CAN bus interface.With the alternative Candlelight firmware, UCAN is enumerated as the native CAN interface on Linux.The UCAN adapter is compatible with ARM-based embedded platforms such as for , for Zero, for ODROID, for BeagleBone, etc. At the same time, it can also be used as USB to CAN application on Klipper.Based on STM32F072Type-C USB socketSupports CAN2.0A and B, baud rates up to 1MCompatible with CANableSupport with for CAnable / CandleLight / Klipper firmware3-pin screw terminal: CANH, CANL, GNDJumper to enter bootloader for firmware updatesOnboard 120R termination default or Jumper to enable/disable terminationtype: UCAN Boardcolor:Black+greenMaterial:PCB+plastic+metalPackage Contents:1 x UCAN BoardOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.