1. This product features four-sided flat pressure instead of multi-point pressure for precise CPU positioning and secure fixation. 2. The contact surface with the motherboard is flat, and standard insulation protection pads are used to reduce pressure on the motherboard and minimize signal interference. 3. The aluminum alloy side is elevated to help reduce signal interference on the motherboard. 4. The product is made from full aluminum alloy with anodized sandblasted finish and CNC precision machining. Installation Instructions: 1. Place the motherboard horizontally on a flat surface and open the CPU socket lever. 2. Use the included screwdriver to remove the upper bracket; set the lower fastener aside. 3. Insert the CPU into the socket. 4. Align and place the improved retention bracket over the CPU socket cover until it clicks into position. 5. Tighten the screws diagonally—half-turn each time—in alternating order to ensure even pressure distribution on the CPU. Color: Red Material: Aluminum Alloy Package Contents: 1 x L-shaped screwdriver 1 x TF71G mounting bracket 1 x Base plate Note: Color may vary slightly due to screen settings and lighting conditions. Measurement tolerance: ±1–3 cm.