Thermalright LGA1700-BCF Compatible 12th Gen CPU Bending Corrector Frame Fixed Backplane

Color: Red/gray/black/blue Product Size: 54x70x6mm Material: Aluminum alloy Weight: Main body 20g This product only supports intel 12th generation CPU, motherboard CPU connector is LGA1700 chipset is H610 B660 Z690 series. 1. Compared with other similar products, this product adopts four-sided flat pressure instead of multi-point pressure, precise positioning, avoiding capacitors, for CPU fixing. 2. The contact surface with the motherboard is flat, and the same specification LOTS original isolation protection pads are used to reduce the pressure on the motherboard and reduce signal interference. 3. The metal side is raised to reduce signal interference on the motherboard side. 4. Sandblasting anode is made of precision CNC aluminum alloy, multi-color optional. Installation process: 1. Place the motherboard horizontally on the desktop and open the CPU clip. 2. Use the included T20 Torx screwdriver to remove the top and put the bottom clip aside. 3. Put the CPU into the socket. 4. Cover the Upgraded buckle on the CPU top cover and wiggle slightly until it clicks into place. 5. Tighten the screws in a half circle at opposite corners. Each screw turns into a half circle and a half circle in diagonal order until the screw is turned on. Will put pressure on the CPU unevenly. Package Included: 1 Fixed Bracket 1 L-shaped Screwdriver 1 Manual Due to the limitation of logistics channels, liquid silicone grease will be returned. If you need silicone grease, please be sure ask the seller before buying