TICFOX WS55-220 DC 48V 500W CNC Brushless Spindle BLDC Motor Driver Controller

¥8,690
配送料無料

TICFOX WS55-220 DC 48V 500W CNC Brushless Spindle BLDC Motor Driver Controller

  • ブランド: Unbranded

TICFOX WS55-220 DC 48V 500W CNC Brushless Spindle BLDC Motor Driver Controller

  • ブランド: Unbranded
希望小売価格: ¥10,590
価格: ¥8,690
得する金額: ¥1,900 (17%)
販売元:
¥8,690
配送料無料

在庫あり

以下の支払い方法を利用することができます

説明

Features WS55-220 is a high performance,cost-effective 3 phase BLDC motor controller.Voltage range is from 20VDC to 50VDC. The controller can drive the DLDC motor with HALL or without HALL. The driver is based on advanced technology and be provided with high speed, high torque, low noise, low vibration, over current protection, overload protection, less phase line. protection, phase line short protection, alarm output, speed signal output. This controller can be used in small equipment, Electric Power Tools, exhaust Fan, Jade grinding machine, Vibrating motor etc. External potentiometer control/external voltage control.With overvoltage protection, over-current protection, locked-rotor protection. Specifications:Rated voltage: 20 to 50 VDC Rated current: 12A Current limiting: 15AMaximum speed: 20000RPM( the specific speed depends on the motor itself and load)Storage temperature: -20℃~+65℃ Usage environment: Avoid direct contact with dust, fumes and corrosive gases Temperature: 0-45℃ Humidity: < 80%, no frost, frost free Shock: 5.9m/S2 Maximum Storage humidity: 0~95%RH Size: Approx. 9.5 x 6 x 3.5cm / 3.74 x 2.36 x 1.38inch Weight: 258g Detail:1.Two modes of speed regulation: External potentiometer: through this potentiometer speed regulation; External voltage: external 10VDC voltage speed regulation; Note: The two speed regulation can not be used simultaneously2. Speed output PG signal: There is a 5v-revolution pulse output between the port and the ground. The output frequency is set to P (Hz), the motor class logarithm is N, and the speed is F (RPM), then the output speed frequency is P=F*N/60. 3. Alarm output ALM signal:There is an 5V alarm pulse output between the port and the ground. 4. Positive inversion function:F/R:Fiddle the toggle switch on the corresponding side, the motor steering direction can be changed. For the toggle switch, the white part is up and down, then twang it up and down. For the toggle switch, the white part is horizontal, and the twang horizontally. Package included:1 x Motor Driver Controller with cable Note:Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering. Package List
  • Fruugo ID: 397644258-848044991
  • EAN: 9789622485075

製品安全情報

以下に概説するこの製品に固有の製品安全性情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

製品安全ラベル

CE Mark
安全上の警告: Please do not allow your child to handle this product alone to avoid swallowing or other injuries; adult supervision is recommended.
材料: As shown in the figure

配送と返品

2日間以内に発送

  • STANDARD: 無料 - 間の配達 月 06 10月 2025–金 10 10月 2025 - 無料

中国より発送。

ご注文の商品は、お客様の仕様に従い、万全の状態で配送されるように最善を尽くしています。しかし、もし注文に抜けがあったり、注文したものと違う商品が届いたり、注文に満足できないその他の理由がある場合は、注文全体やその中のいずれかの商品を返品し、その全額の返金を受けることができます。 全額返金ポリシーを見る