Dual Temperature Sensors for precise climate control The digital thermostat uses both an internal air sensor and an external floor sensor to monitor room air and floor temperature simultaneously. By default, it operates with the internal sensor. Programmable weekly schedules for energy savings Three weekly modes are available: MonFri, MonSat, and MonSun. Each mode supports six daily periods, allowing you to set heating patterns and automate temperature adjustments to reduce energy use. Memory function and autocalibration for reliability Programmed settings are kept during power outages (memory function default off). Temperature readings are accurate: ±0.5°C for room (air) measurements and ±0.1°C for the floor/internal sensor. Wide compatibility with electric heating systems Designed for electric underfloor heating, it can control electric ball valves, thermal valves, heaters, heating films, and carbon crystal heating. Not suitable for boilers or air conditioning systems. Benefits in use Precise control of room and floor temperatures for comfort and efficiency Flexible scheduling to fit daily routines and reduce energy waste Reliable operation with memory and accurate readings Broad compatibility with common electric heating installations Use scenarios Living room: Install the thermostat with underfloor heating and set a MonSun schedule with six daily periods to maintain warmth during mornings and evenings. Bathroom: Use the floor sensor to keep the tile warm before and after showers, with a suitable weekly pattern to match daily routines. Small apartment: Create energysaving profiles by selecting MonFri mode during workdays and MonSun mode for weekends, while maintaining comfort in living areas. Note: Not compatible with boilers or air conditioning systems. Size and material details are not specified.