This Universal Programming Adapter Seat is designed to be Compatible with PICkit3, ICD2, and PICkit2 programmers. It supports 8 to 40-pin microcontrollers and works with the MPLAB Integrated Development Environment (IDE) for debugging and programming PIC and dsPIC Flash devices. The adapter connects via a full-speed USB interface (12 Mbits/s) to your PC and supports low voltage operation from 2.0V to 6.0V. Diagnostic LEDs (power, busy, error) provide clear status indication. It allows read/write of program and data memory, erase with verification, freeze-peripherals at breakpoints, and can program up to 512K bytes of flash using the Programmer-to-Go feature. To use: align the microcontroller with the appropriate pin count marker (e.g., 28/40P on left for 28/40-pin devices, 8P/14P/18P/20P on left for smaller packages) and set the short-circuit cap to the corresponding position (A or B). The adapter supports programming of PIC16/18XX series in 40-pin, 28-pin, and 18-pin packages, as well as 8/14/20-pin families (except specific models like 16F59, 16F57, and 10FXX). Color: Red Material: Plastic Size: 14.5 x 7 x 4 cm Package Contents: 1 x Programming Adapter Seat 1 x USB Cable 1 x 6-Pin Cable 1 x Programmer Unit (PICkit3 Simulator) Note: Color may vary slightly due to lighting and display settings. Allow a small measurement error.