Stud type track rollers are similar in their construction to single and double row yoke type track rollers, except that the raceway is formed by a heavy-section roller stud with a fixing thread and lubrication hole. Due to the thick-walled outer ring with profiled outside surface and the rolling element set, they can support high radial loads as well as axial loads arising from slight misalignment and skewed running; they are suitable for applications such as cam gears, bed ways and conveying equipment Specifications Roller diameter: 26 mm Roller width: 12 mm Stud diameter: 10 mm Stud length: 23 mm Roller shape: Crowned Roller material: Steel Bearing element: Needle Rollers Closure type: Sealed Head type: Hex Head Hex size: 4 mm Thread size: M10 x 1 mm Operating temperature range: Maximum of +280 °F Overall length: 36 mm Radial dynamic load capacity: 4.84 kN Radial static load capacity: 6 kN Maximum rpm: 5300 rpm Lubrication hole location: Head, Stud End Finish/coating: Uncoated Standards met: ANSI/ABMA Standard 18.1, ISO 7063 Series: KR