1. Solve the problem that the graphics card is too long and cannot be directly inserted into the USB3.2 19PIN data cable2. Solve the problem that the 19PIN directly inserted on the motherboard is too high to close the cover3. Increase the height of the PCB board to avoid touching the components on the motherboard after plugging in4. Solve the problem that the cable is not good or cannot be bent due to the wrong position of the cable outlet of the chassis, and the small thing that the chassis lowers the height of the usb cable will not lose the data transmission capacity at all.5. Small size, solve the problem of some devices interfering with the position of the usb interface.Output interface: USB3.2 GEN1 19PIN maleInput interface: USB3.2 GEN1 19PIN female socketInterface rate: 5GbpsSupport slot: USB3.2 19PIN maleProduct function: connect to the motherboard 19PIN and turn, which is convenient for small chassis wiringSupport system: WINXP/WIN7/8/10/11/LINUXType: Cable AdapterModel Number: USB3.2 GEN1 19Pin 90 degreesType: USB Header AdapterStyle: Up Bend-Acolor:Black+blueMaterial:PCBPackage Contents:1 x USB AdapterOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.