Product Introduction: The MKS CANable V2.0 Pro module delivers high-speed transmission and operational stability, with enhanced anti-interference capability—ideal for industrial debugging and motor applications. When using the CandleLight firmware, CAN is enumerated as a native CAN interface on Linux. The CANable analyzer is compatible with ARM-based embedded platforms, including Raspberry Pi, Raspberry Pi Zero, ODROID, and BeagleBone—making it well-suited for product integration. Product Features: 1. Supports CAN 2.0A and CAN 2.0B; baud rate up to 1 Mbps. 2. Supports CandleLight and slcan firmware; slcan supports CAN-FD with test rates up to 2 Mbps / 5 Mbps. 3. Terminal resistor can be enabled or disabled via jumper. 4. Features USB Type-C interface, online firmware upgrade, and DFU mode firmware upgrade. 5. Powered by a high-performance ARM Cortex-M4 STM32G431C8T6 processor, operating at up to 170 MHz. 6. Includes schematic diagram, firmware, source code, and host software—comprehensive resources for easy development. Analyzer Board Version: V2.0 Pro Material: ABS Color: As Shown Package Contents: - 1 × USB data cable - 1 × 3-pin double Dupont cable - 1 × analyzer board Note: Color may vary slightly due to screen settings and lighting conditions. Dimensional tolerance: ±1–3 cm.