Orange5 Technical : USB power supply (USB2.0/3.0); Universal easy to plug panel ZIF16 for EEPROM; Control of contacts in the sockets; Two expansions compatible with Orange4 and MTRK Protection against overcurrent; Overload voltage protection Three 3 adjustable voltage and current control: Voltage of power supply ( 2.0...5.0V ), programming voltage (2.0...21.0V), additional static 10V for microcontrollers High-speed bidirectional pin drivers with adjustable voltage (2.0...5.0V); Wave cycle generator with frequency ( up to 24 Mhz) and out voltage(2.0...5.0V) adjustment Capability of functional emulation of class CDC USB devices Built-in 32-bit virtual machine Supported interface: I2C, SPI, MicroWire, JTAG, UART, BDM, ISO7816, K-LINE (via adapter), CAN (via adapter) Programmer is encolsed in a functional box. Supported working under XP/7 32bit. [*Win8.1] Installation and Work with Orange-5 under Windwos 7 and 8.1 CnCterm - Terminal program for work with COM ports. Feature: Supports any COM ports, incuding virtual from 1 to 20 Works with text (ASCII) and HEX mode Creating a list of commands that allows editing and fast sending Fine-tuning the exchange rate Saving files including and port settings. Saving incoming data in binary files File transfer via serial port. Delay settings for bytes and blocks " mode Delay settings between incoming data Managment of DTR, chains, visualising , , CD, RI Supports Orange5 programmer in emulation mode. Note: Please check as much as possible to make sure the item is what you need. Tips: The product may be updated constantly, Due To Different Batches, The Actual Product May Have Slight Differences Or Color Differences, Which Does Not Affect Use Colour: Picture Color Material: Plastic Package Contents: 1*Orange5 V1.38 Programmer set Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.