説明
V310 OBD Code Reader OBD2 Scanner Car Check Engine Fault Diagnostic Tool Automotive Scanner Multi Language Live Data Read VIN
Specification:
Product mode: OBDII code reader
Product type: V310
Product dimensions: 155x85x25mm/6.1x3.3x1in
Product Weight: 200g/0.44lb
Storage temp: -30 60
Software version: V310-FLASH-V01.01 V310-MCU-V06.1
Handware version:V.1
Operating voltage: DC 9?16V provided via vehicle
Working current: 80mA
OBD connector: 16 PIN OBDII
Product Functions:
Read error and Clear diagnostic code--General and factory specified and display their meaning.
Easily determines the cause of the check engine light.
View freeze frame Information.
Displays I/M readiness Status.
Retrieves vehicle information.
Data stream.
Real time curve.
Retrieves car speed information.
DTC one click query.
Supports OBD-II protocols:
1. SAE J1850 PWM (41.6Kbaud)
2. SAE J1850 VPW (10.4Kbaud)
3. ISO9141-2(5 baud init, 10.4Kbaud)
4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
5. ISO14230-4 KWP (fast init, 10.4 Kbaud)
6. ISO15765-4 CAN (11bit ID, 500 Kbaud)
7. ISO15765-4 CAN (29bit ID, 500 Kbaud)
8. ISO15765-4 CAN (11bit ID, 250 Kbaud)
9. ISO15765-4 CAN (29bit ID, 250 Kbaud)
Where can I plug the OBD?
The OBD port is often under the dash, or under a panel below the handbrake in the center console.
How to use it?
Simply plug into the OBD II port on your car and turn ignition on and you ready to go.
Warm tips:
*Works on 12V provided by the vehicle battery ONLY.
*Must be 16 PIN OBD II protocol.
Package list :
1x Car Engine Diagnostic OBDII Reader
1x User Manual
-
Fruugo ID:
192513975-410278485
-
EAN:
9402056602992
製品安全情報
以下に概説するこの製品に固有の製品安全性情報を参照してください。
以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。
製品安全ラベル
安全上の警告:
important Safety Instructions Read Before Use: Please read all instructions and safety warnings before using this product. Failure to follow these guidelines may result in injury, damage, or malfunction. General Warnings Intended Use: Use this product only for its intended purpose as described in the user manual. Supervision Required: This product is not intended for use by children or persons with reduced physical, sensory, or mental capabilities without supervision. Inspection Before Use: Check for any signs of damage or wear before use. Do not use if damaged. Usage Precautions Environment: Do not use in wet, damp, or flammable environments unless specified as safe for such conditions. Proper Operation: Follow all operating instructions carefully. Avoid improper handling or misuse. Power Source: Use only the recommended power supply or batteries. Do not exceed specified voltage or current ratings. Maintenance and Care Cleaning: Disconnect from power before cleaning. Use only manufacturer-recommended cleaning methods and solutions. Storage: Store in a cool, dry place away from direct sunlight and extreme temperatures. Repairs: Do not attempt to disassemble or repair the product. Contact authorized service personnel for assistance. Specific Warnings Avoid Hazards: Keep the product away from sharp objects, water, and heat sources. In Case of Malfunction: If the product malfunctions or exhibits unusual behavior, discontinue use immediately and contact customer support. Disposal Instructions Recycling: Dispose of the product in accordance with local electronic waste disposal and recycling guidelines. Battery Disposal: Follow specific regulations for the safe disposal of batteries if included.
