Usage Tips:Water Flows Sensor-Switch LighFeatures: Design products adopting magnet repulsion instead of springs, safe and reliableThe flows switch has high sensitivity and long service lifeWhen water flows is larger than 0.75L/min, it will outputInlet and outlet threads are both G1 standard threads, fit for most connectionsWide Use: Widely used in the instantaneous electric water heaters, can save electricity powerNotice:1.Actual color may be slightly different from the imge due to different light effect2.Please allow 1-3cm deviation due to manual measurement Description:Inlet/Outlet Thread: G1 DN15 Ambient Temperature: 1COperating Temperature: 120CMin. Start Flows: 0.75L/minMax-Flows: 5L/minRated Working Pressure: 0.65MPaMaxC-Pressure on Shell: 1.5MPaSignal Output Load: DC24V/1A, AC36V/1A, AC220V/0.1ANote:1, Ambient temperature should not less than 0C. Do not knock shell. Keep it away from magnetic objects.2, Output signal is on-off output, so please make sure the connection method of controlled objects is on-off control.3, Power of controlled objects should not exceed signal load capacity4, This product is only used for water, not suitable for other fluids.Package List:1c G1 DN25 Magnetic Stainless Steel Flows Switch