Waterproof SHT25 Compatible Soil Temperature Humidity Sensor Probe I2C Output Cable Type

The FS304 temperature and humidity sensor probe is a cable type sensor in the digital temperature and humidity sensor series. The sensor outputs a calibrated digital signal in a standard I2C format. The FS304 uses the world's most advanced temperature and humidity sensors as the core components. The sensor includes an improved capacitive humidity sensing element and a standard energy gap temperature sensor element for improved performance.Features:1. The temperature and humidity sensor probe is a cable type sensor in the digital temperature and humidity sensor series.2. Using the world's advanced temperature and humidity sensors as the core components.3. Can be applied compatible with computer room monitoring, HVAC, weather station, warehouse, construction site, concrete test block inspection, agricultural greenhouse, flower nursery and soil temperature and humidity measurement.4. Fully calibrated.5. Digital output, I2C interface.6. Low power consumption, low cost, small size.7. DFN package for reflow soldering.8. Waterproof, dustproof, corrosion resistant.Specification:Item Type: Temperature and Humidity SensorModel: FS304-SHT20/FS304-SHT21/FS304-SHT25 (Optional)Working Current: 80%, may result in temporary signal drift (after 60 hours drift +3% RH). When returning to normal working conditions, the sensor will slowly return to the calibration state. Prolonged use under abnormal conditions will accelerate the aging of the product.Storage Conditions and Operating Instructions:Humidity sensors are not ordinary electronic components and require careful protection. This must be taken seriously by users. Prolonged exposure to high concentrations of chemical vapor will cause the sensor reading to drift.