Mutual inductive current monitoring with galvanic isolation - The device uses mutual inductive sensing to detect AC current with high accuracy while safely isolating input from output. Self-powered operation - No external power supply is required; the sensor operates from the measured current. Easy installation and use - Simple to install and operate; during measurement there is no need to connect DC to the circuit under test. Measured AC current and output - Measured AC current: 0–10 A, 0–20 A, or 0–50 A (model dependent) - Output signal: DC 0–10 V Compatibility and integration - 0–10 V DC output facilitates connection to PLCs, data loggers, and analog measurement equipment. Use scenarios - Industrial automation and motor monitoring: monitor current draw of motors on production lines and feed the 0–10 V output to a PLC for control or protection. - Building energy management: track branch circuit currents and log consumption for energy auditing and demand planning. - Renewable energy and power conditioning: monitor AC input currents to inverters or battery charging circuits and integrate with monitoring systems.