ESP32-C6-Pico is a compact microcontroller development board featuring multiple digital interfaces. It uses the ESP32-C6-MINI-1 module, which includes a RISC-V 32-bit single-core processor running up to 160 MHz, 320KB ROM, 512KB SRAM, 16KB LP SRAM, and 4MB flash memory. The pin layout is compatible with the Raspberry Pi Pico development board, enabling easy expansion with various peripheral devices.Software development is supported via ESP-IDF or Arduino IDE, allowing for quick setup and integration into projects.Key features: - Integrated 2.4 GHz Wi-Fi 6 and Bluetooth LE dual-mode wireless connectivity with enhanced RF performance - USB Type-C interface for reversible plug-in convenience - Extensive peripheral interface support with Pico-compatible pinout for high compatibility and scalability - Stamp-hole design for direct soldering and integration into custom carrier boards - Multiple low-power operating modes to optimize communication range, data rate, and power consumption based on application needs Note: To ensure proper functionality, GPIO22 (SDA) and GPIO23 (SCL) must be configured as I2C pins using the provided TCA9554PWR library. These pins are dedicated to I2C slave devices and cannot be used for other functions.Color: Black Material: PCB Package Contents: 1 x ESP32-C6-Pico Development Board Note: Product appearance, color, and silkscreen labeling may vary slightly between batches without affecting functionality. Monitor settings and lighting conditions may cause slight color variation between images and the physical product. Dimensional tolerance: ±1–3 cm.