Window Shade Mounting Brackets & Pins, Replacement Hardware for Horizontal Blinds

Durable: These metal hold down brackets are made of metal, offering strength and long-lasting performance. They are easy to install and resistant to deformation or breakage. Suitable for most blinds and windows. Appropriate Size: Designed to fit most standard blinds without occupying excessive space. Please verify dimensions before ordering to ensure compatibility with your blinds or windows. Simple Design: Compact and discreet, these brackets blend seamlessly with most blind styles. Their minimal profile ensures they do not detract from the appearance of your blinds or obstruct your view. Easy Installation: Includes all necessary hardware for straightforward setup. Follow the included installation steps for secure mounting. Installation Steps: 1. Tools needed: drill, screwdriver, tape measure, hammer, pencil. 2. If the bottom rail lacks pre-installed pins, drill two holes—centered on both ends of the rail—using a 7/64 inch or 3/32 inch bit, 1/2 inch deep. 3. Insert the pin bolts into the drilled holes. 4. Position the blind with the bottom rail flat and level; mark bracket locations with a pencil. 5. Secure the bracket to the door or window frame using screws. 6. Measure and mark the corresponding position on the opposite side. 7. Repeat steps 5–6 to install the second bracket. Color: Silver Material: Metal Size: Approx. 42 x 32.2 mm Package Includes: - 4 x Hold down brackets (with screws) - 4 x Pin bolts Note: Color may vary slightly due to screen settings and lighting conditions. Measurement tolerance: ±1–3 cm.