Wireless 2.4G Bluetooth V6 Module for Electric Skateboard with VESC Tool Support

Kindly Reminder: This Bluetooth module supports Android mobile devices only. It is used for communication between the VESC and VESC Tool (mobile) over BLE. The UART port on the VESC must be enabled at a baud rate of 115200 for proper operation. The UART port on the VESC operates only at 115200 baud. Operating voltage: 2.0V – 12V Onboard chip: NRF51822 Effective communication distance: Approximately 15 meters Frequency range: 2.4 GHz 2.4 GHz multi-protocol RF receiver ARM Cortex-M0 32-bit processor 256 kB flash memory & 16 kB RAM 2.0 mm seven-pin four-wire connector, length: 90 mm Antenna length: 145 mm Net weight: 3.5 g Appearance, color, and printed markings may vary slightly between batches; this does not affect functionality. Type: V6 Color: Black Material: Composite materials Dimensions: PCB size: 27 mm × 13 mm Package contents: 1 × Bluetooth Module Note: Light reflection and display differences may cause slight color variation between the image and the actual product. Measurement tolerance: ±1–3 cm.